Installation

It is very easy and fast to install a spa.

You can install it wherever you want, both inside and outside:

• room dedicated to this purpose,
• veranda
• basement
• garden, terrace.

The spa does not require a raised surface, flat and stable, and an electrical arrival and an arrival and a drain nearby. A concrete base is preferable but not essential. You do not need plumbing. The water filling is done only a few times a year (depending on usage). Unlike other embellishments of your home you can take it with you if you move.

The spa offered by JFC must be connected to a section of 6 mm2 cable with a minimum differential switch 30 Ma TYPE A top line. Depending on model, the power required varies between 24 and 32 amps. Please check with our team needs to know the exact model you have chosen. Spas can be connected to the power line that you have provided through a sealed box and a connection type "domino" and does not require specific intervention in electricity.

We recommend in all cases to call a technician to "make" the necessary current near the point where you want to install.

To drain the spa you will need a drain pipe near the location where you install your spa. It is not necessary to connect the spa at all times to the sewer because you drain your spa a few times a year.